Impregnators

 

9"d top x 12"d bottom x 15"h Nautilus (Rivited seam) paint pot w/6-1/2" dogs.  2-1/2" and 1                   Good                              $145

(Item No. 430)

 

Degassing test sustem. 15" d x 14" h B.J. nad gard. 20" dia  Ni plated steel, BP main valve  7 elec                                                     $1,500

feedthrus. Edwards ES-150, 5.3 cfm MP, 1/3 HP, 115V motor, 23" x 27" x 38"hi cabinet (Item No.

443)

 

Degassing station 11"id x 12"H Glass Belljar. 14"x14"x 16"H Al guard.  14"x14"SST BP on a 2' xWx   Good Used                          $1,950

3'L x 34"H rubber tired push cart. Welch 1402 5.6 cfm MP, valves and gauge. (Item No. 425)

 

Paint  Pressure Pot   8 1/2" ID x 10" H   60 PSI  4 ea. 3/8 - 16 dogs.  Steel pot. Cast Iron top.                  Good                                $125

(Item No. 428)

 

                    Redpoint (Epoxylite) ESL-1415-C5 Encapsulator, 14"Dx 15"H steel main Vac/press (100psi max)        As Is                                 $12,500

chamber  w/2 V.P. 10"dx14"H Steel degassing/mixing chamber w/ 2 VP and gear motor drive. 

Hastings VT-4 vacuum gauge and (2) Omron E5C4 digital heat controls. Flexlites on both chambers, no vac. Pump or internal tooling, refurbished $15,500 (Item No. 447)

 

Redpoint (epoxylite) ESL-3030-C50 encapsulator. 30" d x 30"h steel heated tank, 100 psi max w/ VP,   Unused                             $40,000

  lite, vac gauge and controls. 5 gal side loader epoxy mix tank w/ motor stirrer. (2) epoxy component load tanks, Welch 139 ( 53 cfm) (Item No. 464)

Redpoint ESL-2424-C15 encapsulator, 24" d x 24" h STL heated tank w/control & vac. Gauge epoxy     Very Good                       $25,000

mixing tank Welch 1397 MP 115/230V 35A (Item No. 4597)

 

Shrader Impregnator-STL, Vacuum only. 48”w x 36” D x 36” Hi inside. Top Door is spring counter        As-Is                               $4,000

balanced and has one 4” VP, One 4” blanked port and one KF-40, 1 ½”port. Rear has a KF-50 2” port

and bottom one KF 40, Front has two 8” gloveports-blank and one 5” VP. Chromalox heating               operational                         $2,500           element. No controls, front panel missing. Mounted on 4” caster cart.                                                    

Leybold D60A, 2 stage, 36 CFM MP and WA-250, 164 CFM blower mounted on iron frame      

1.5 HP 230/460v                                                                                                                                Both chamber and blower            $6,000      

                                                                                                                                                       

            Vacuum degas station, 20" SST B.P. w/1 3/4" and 4" hole, 3/4" & two 1 1/2" brass valve manifold          As Is                                 $500

table 24" x 38", no BJ or MP (Item No. 4818)

 

Vacuum Degas system Mfg. Unk. 18" SST Folded collar, 20" d top flg, 5 1/2" h w/ 12 ea 1" ports,         As Is                                $1,950

20" SST BP w/(10) 1" holes & 2 roughing ports. SST cover( hinged), Temescal 1 5/8" roughing and

3/8 air release valve w/ solenoid, 1 5/8 Mol. siev_ trap w/pur (Item No. 455)